EP325J EP 121250 25J

- Product Description
- We are engaged in offering Indoor Embedded Poles, which are appreciated due their construction in accordance with the set industrial standards. What makes the Indoor Embedded Poles, we offer, stand out in comparison to the other alternatives available is their exceptionally high shelf life. Being sourced from the most reliable vendors of the market, Indoor Embedded Poles are assured of their excellent electrical endurance.
Rated Frequency | 50/60Hz |
Rated Maximum Line to Line Voltage | 12kV,r.m.s |
Rated Power Frequency Withstand Voltage:Air | 42kV,r.m.s |
Rated Impulse Withstand Voltage:Air | 95kV,Peak |
Rated Normal Current | 1250A |
Rated Short- Circuit Current ( 3 Phase Symmetrical Basis) | 25kA,r.m.s |
Percentage D.C. Component of Rated S.C. Breaking Current | 50.00% |
Rated Short-Circuit Making Current | 50kA,Peak |
Rated Duration of Short Time Current | 4s |
Rated Short-Time Withstand Current | 25kA,r.m.s |
Rated Peak Withstand Current | 50kA,r.m.s |
*Maximum Contact Resistance at Minimum Closing Force | 25Micro ohms |
*Rated Breaking Current of Single Capacitor Bank | 630A,r.m.s |
*Rated Breaking Current of Back-to-Back Capacitor Bank | 400A,r.m.s |
Rated operating sequence | o-0.3s-co-180s-co |
Closing Force due to Bellow and Atmospheric | 80±40N |
Force Required to Hold Contacts open at Full Stroke | 120±50N |
Contact Stroke | 8±1 mm |
Opening Speed(average of 75 contact gap) | 1.5±0.2m/Sec |
Maximum Overtravel During Opening | 2mm |
Maximun Rebound During Opening | 2mm |
Closing Speed(average of last 30% contact gap) | 0.9±0.2m/Sec |
Maximum Contact Bounse Duration(with maximum 2 bounces) | ≤2ms |
Rated Contact Compressive Force | 2500±200N |
Closing and Opening non-simultaneity of three-phase Contacts | ≤2ms |
Electrical Life at Rated Normal Current | 50,000 Operations |
Electrical Life at Rated Short Circuit Current | 100 Operations |
Mechanical Life | 50,000 Operations |
Contact Erosion Limit | 3mm |
Shelf Life | 20Years |
Note
- Meets or exceeds the electrical endurance requirements of class E2 for autoreclosing duty per IEC 62271-200 and JB 8738-2008.
- * Rated Characteristics to be given on request
